High current measurement resolution: 10 mA (0,01A).Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health.Shunt selection capability up to 10.000 Amps.500 Amp quick connect shunt and connection kit.Programmable relay, to turn off non critical loads or to run a generator when needed.Remaining time at the current rate of discharge.Battery voltage, current, power, ampere-hours consumed and state of charge.Prevents increased current draw in case of an alarm. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days. The battery will be damaged if the remaining capacity reserve is drawn from the battery. Very low current draw from the batteryĬurrent consumption: 0,7Ah per month (1mA) and 0,6Ah per month (0,8mA) 24VĮspecially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown.Īfter shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. ![]() Victron Energy recommends the Battery Balancer (BMS012201000) to maximize service life of series-connected lead-acid batteries. Please see the BMV manual,section 5.2, for more information. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. One bad cell or one bad battery can destroy a large, expensive battery bank. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m) no other components needed. The shunt connects to the battery monitor with a standard RJ12 telephone cable.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |